Mitee-Bite 25mm x M2 Cylinder Thread CNC Lathe Manual Actuator-Pull Force 4000Lb

Description

1 Pc. Mitee-Bite Products LLC
Made in USA Brand New
25mm (Shaft ) x M2 Cylinder Thread Manual Actuator for CNC Mills-Pull Force 4,000Lbs
The Actuators are specifically designed for gripping the ID of blind holes but may also be incorporated in many applications that require a straight draw actuated 90 degrees from the drive screw. The Actuators are capable of gripping on bores ranging from .16" (4.1mm) to 1.39" (35.3mm) using Mitee-Bite standard ID clamps, Models #00 through #4 (flange on #4 may require modification when mounting to Mill Actuator)
The Mill block can be mounted in several ways including on a fixture plate, for high density workholding applications, or gripped in a vise. The same bolt hole configuration can be used for both the vertical and horizontal planes.
Both styles of Actuators come completely assembled with the heat-treated cylinders tapped for the following clamp drive screws: M2, M4, M6, M8, M10 and M12.
SPECIFICATIONS:
Manual Actuators will produce over 4,000 lbs. of pull-force with 45 ft. lbs. of torque. Do not exceed 5 ft/lbs with the M2 or 20 ft/lbs with the M4.
Customer will mount clamps onto the Actuator according to clamp instructions. Actuators may be used with clamps other than ID Xpansion™ Clamps.
The Mill version has 8 mounting holes with 1.75" (44.45mm) spacing for 1/4-20 (or M6) mounting bolts.
The “top” access hole for the clamp drive screw is approximately .315" (8mm) for the M2 through M8 and .484" (12.3mm) for the M10 and M12.
Cylinder travel is .040" (1.016mm)
Threaded cylinders may be interchanged with our other cylinder sizes by first removing the retaining ring and the actuator drive screw and then tapping out the cylinder. This may require the use of a rubber mallet and punch.
Threaded cylinders are heat treated to 54 RC, and have a diameter of 5/8" (15.875mm).
Both the Mill and Lathe versions are made of 12L14 with a black oxide finish.
OPERATION AND USE:
Align Indicator mark on actuating screw (A) (apex of cam) with the alignment mark on actuator housing.
Lightly tighten clamp drive screw (B).
Tighten actuator drive screw (A) expanding ID clamp .002 - .005" (.050 - .13mm).
Machine clamp to size of your bore.
Loosen actuator drive screw (A) aligning marks once again.
Loosen clamp drive screw (B) approximately 1/8 turn.
Ready for use, load parts and tighten actuator screw. Do not exceed 45 ft/lbs of torque. Care should be taken not to over-tighten with the smaller diameter screws (M2, M4).
These images shows how manual actuator can be use for application. You will only get described actuator nothing else.
10 Reason to bid or buy my listing or products from eBay
We do accept world the most secure & reliable payment method “PayPal”.
Listings are described with detail information.
Every listing or items have digital images from every angle from buyer’s perspective.
You will get what we are advertising on eBay no substitute or alternative products.
We are not listing anything on eBay, which we do not have in stock so; you will get your won products definitely.
Prompt Shipping - As soon as we get the payment we are shipping products as per customer instruction.
Prompts Feedback – We left positive feedback as soon as we ship your products, we do not wait for buyers to leave feedback first. So, you have 100% guarantees that you will get the feedback as soon as complete the transactions. We do expect same from buyer for feedback.
We do combine all you items to save shipping cost. Every shipping package have tracking # so, it is easy to track. We will e-mail you tracking# as soon as we ship your auctions.
100 % satisfaction guarantee.
Great customer service.
Track Page Views With
Auctiva's FREE Counter