TruFLOW Manifold, 8-loop S&R A2610800

Description

Note: This manifold requires 16 Loop Fitting Assemblies (please see below).
TrueFLOW Manifold without Flow/Temperature Meters come fully assembled ready for installation. The TruFLOW balancing Hex Key is used on the internal balancing valves of the supply manifold to balance the loops across the manifold. Manifold is shipped with the appropriate number of Actuator Adapters (A2630028). Maximum recommended flow to the manifold based on manifold body diameter is 21.0 gpm.
Note: The Flow Meters (A2640015 and A2640027) are purchased separately and installed on the return manifold.
This manifold requires (16) Loop Fitting Assemblies.
PEX Loop Fitting Assemblies Options
PEX Compression Loop Fitting Assemblies
A4020313: 5/16" PEX to R20 Loop Fitting Assembly
This fitting will connect 5/16" PEX to a loop of the Manifold without requiring the use of a PEX Tool.
A4020375: 3/8" PEX to R20 Loop Fitting Assembly
This fitting will connect 3/8" PEX to a loop of the Manifold without requiring the use of a PEX Tool.
A4020500: 1/2" PEX to R20 Loop Fitting Assembly
This fitting will connect 1/2" PEX to a loop of the Manifold without requiring the use of a PEX Tool.
A4020625: 5/8" PEX to R20 Loop Fitting Assembly
This fitting will connect 5/8" PEX to a loop of the Manifold without requiring the use of a PEX Tool.
ProPEX Loop Fitting Assemblies
Q4020375: 3/8" ProPEX to R20 Loop Fitting Assembly
This fitting will connect 3/8" PEX to a loop of the Manifold but requires a ProPEX Expansion Tool to make the connection.
Q4020500: 1/2" ProPEX to R20 Loop Fitting Assembly
This fitting will connect 1/2" PEX to a loop of the Manifold but requires a ProPEX Expansion Tool to make the connection.
Q4020625: 5/8" ProPEX to R20 Loop Fitting Assembly
This fitting will connect 5/8" PEX to a loop of the Manifold but requires a ProPEX Expansion Tool to make the connection.
Q4020750: 3/4" ProPEX to R20 Loop Fitting Assembly
This fitting will connect 3/4" PEX to a loop of the Manifold but requires a ProPEX Expansion Tool to make the connection.
Optional Installation Accessories:
Loop End Cap
A2080020: Manifold Loop End Cap
These allow you to cap off a loop of the manifold if it will not be used.
TruFLOW Supply/Return Ball Valves
A2631250: TruFLOW Supply/Return Ball Valves (box of 2)
These allow you to quickly shut-off the supply and return sides of the manifold. These valves are R32 thread x R32 thread. The supply and return ends of the manifold is R32.
TruFLOW Supply/Return Adapters
TruFLOW Supply/Return Adapters
These allow you to connect the manifold to your supply and return lines. The supply and return end of the manifold is R32 thread. Choose an R32 adapter that will connect the manifold to your desired application.
Actuators
A3010522: Thermal Actuator (4 Wire)
If you want to use your manifold to heat multiple zones, you can purchase return side actuators that work along side thermostats. The actuators act as zone valves to allow you to use one manifold to control the temperature in different rooms independently.