Whole House Restaurant Big Blue BB Water Treatment Filter System Sediment Carbon

Description

Watergeneral Whole house water filtration systems
Brand new unit, current production model, made in USA
Model: WH-2201
High flow 2-stage sediment and carbon filtration system, 4.25 in. x20 in. filters, 1 inch inlet
Applications:
Whole house filtration
Gardening
Restaurants
Food and Beverages applications
Fresh water aquariums, ponds
Pre-treatment for large RO systems
BENEFITS:
Removes sediment, dirt, rust, chlorine, odor, and bad taste
Reduces cloudy water caused by sediment
Reduces wear on expensive faucets
Reduces iron stains caused by suspended iron
Reduces staining in sinks, toilets and showers
Reduces plugged faucet aerators
Ideal for homes, farms, wells, pets, gardening, restaurants, fresh water aquariums, spa, and pretreatment for RO systems
The system includes
2-stage water filter unit with sediment filter and carbon filter inside, and instruction sheet.
Filter Housing is the upgraded PENTEK BIG BLUE housing which is more durable. No filter wrench is required; Hand tight only
*This unit does not include the connectors or fitting for the 1” inlet/outlet. The unit has 1 inch FPT (female pipe thread) for the inlet/outlet.
Specification:
1
st
stage 5 micron sediment filter
removes sediment, rust, sand, and dirt. 4.25 inch diameter x 20 inch height
2
nd
stage 10 micron carbon block filter
removes chlorine, bad taste, odor. 4.25 inch diameter x 20 inch height
Dimension of the unit
Width: 15 inch
Height: 23 inch
Depth: 7.5 inch
Inlet/outlet
1 inch FPT (female pipe thread)
Overall flow rate: approximation
15 gallons per minute, depends on pressure
Capacity: approximation
carbon filter: approximately 40,000 to 50,000 gallons depends on water condition (change every 6-12 months depends on water condition)
Pressure drop:
3-6 psi approximately
Features:
Pentair Heavy Duty housing
standard 1 inch FTP (female pipe thread)
replacement filters: the system come with initial filters. Extra filter set
BBK-20 is available in our shop at anytime
Installation:
For residential whole house installation, the system would be installed near the water main. It requires cutting into the water main, so hiring a plumber to do the installation is recommended. It is recommended that the unit would be installed inside a garage to prevent sun damage and freezing.
For other applications, the system has standard 1 inch FPT, female pipe thread, inlet/outlet, so you can purchase fittings, pvc or copper pipes from local plumbing supply stores to fit your applications.